Hikvision DS-K1T671TM-3XF Isı Ölçerli Yüz Tanıma Cihazı

Açıklama

 Supports Vanadium Oxide uncooled sensor to measure target’s temperature
 Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
 Recognition distance: 0.3 to 2 m
 Fast temperature measurement mode: Detects face and takes temperature without identity authentication
 Multiple authentication modes are available: card and temperature, face and temperature, card and face and
temperature, etc
 Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At
the same time, the authentication or attendance is valid
 Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At
the same time, the authentication or attendance will be failed
 Displays temperature measurement results on the authentication page
 Triggers voice prompt when detecting abnormal temperature
 Configurable door status (open/close) when detecting abnormal temperature
 Transmits online and offline temperature information to the client software via TCP/IP communication and saves the
data on the client software
 Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity
 Suggested height for face recognition: between 1.4 m and 1.9 m
 Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
 Watchdog design and tamper function
 Audio prompt for authentication result
 NTP, manually time synchronization, and auto synchronization
 Connects to external access controller or Wiegand card reader via Wiegand protocol
 Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
 Imports and export data to the device from the client software
 * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher
security level, use multiple authentication modes.
 * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the
device up